PowerSpout PHP Spare Pump Bundle

This bundle comes with a full spare pump so that at time of servicing you can simply swap the pumps and service the other at your leasure. In NZ you can send us the old pump and we can service it for you. 

The PowerSpout PHP (Pelton Hydraulic Pump) is a water powered water pump.  If you have a small falling stream and want to pump water to a higher tank (up to 200m) for domestic and stock water then this may be the perfect solution.

A PHP pump has the following advantages over a traditional water ram pump:

• Quiet operation
• Low cost plastic penstock can be used which is also light and easy to work with
• Pump different water to the driving source
• Penstock can meander down the riverbank
• No heavy concrete foundations
• Can pump from a small stream with a heavy silt burden and suspended grit particles without the need for a settling tank
• More than 1 PHP can be stacked on a common penstock, so only 1 size needs to be made resulting in a much better economy of scale and final retail price
• The same PHP unit be used on a wide range of sites as the cam offset (stroke) is adjustable
• Lightweight under 18kg
• Runs without the need for a shock absorbing dampener
• Oil lubricated for a long life
• Typical efficiency much higher than a water ram (at high heads)
• Flow is easily adjustable to meet specific needs
• Maximum lift/fall ratio >70:1

Each PHP Spare Pump Bundle comes with:

• 2” BSP valves you need to connect to your supply pipe with the appropriate fittings
• 1” (25mm) water inlet fitting and ¾” (20mm) fitting for the delivery pipe to your storage tank
• 4 x Tek screw fixing kit
• An mid-range oil filled pressure gauge for the penstock pressure
• An unloading valve and pressure gauge for the tank delivery pipe
• A full spare pump
• 2x Spare parts kits

PowerSpout turbines and pumps are tailor made products which match your unique resource and personal requirements. We do sell direct to customers who are keen D.I.Y.er's but please note that you will need to pay for system design/installation support.

It is often cheaper to buy through a dealer as they can often offer free global freight and their knowledge and experience will help you create a successful system and avoid costly mistakes.

Regardless of whether you buy directly from us or from a dealer you will need to collect your site data, assess your water needs and complete a calculation. If you need help doing this please read this guide.

Refer to PowerSpout Document Index Links for a complete index of documents.