Arrow Fat Left Icon Arrow Fat Right Icon Arrow Right Icon Cart Icon Close Circle Icon Expand Arrows Icon Facebook Icon Youtube Icon Hamburger Icon Information Icon Down Arrow Icon Mail Icon Mini Cart Icon Person Icon Ruler Icon Search Icon Shirt Icon Triangle Icon Bag Icon Play Video

SHP-TX Spare Oil Side Seal

$ 20.00 NZD

SHP-TX Spare Oil Side Seal

$ 20.00 NZD

Weight: 0.05 kg

The SHP-TX has one oil seal on the shaft that protrudes from pump body and 3 seals - one on each plunger.  If you see an oil leak from any of these 4 seals at a service check (or you may notice that the oil level in pump body is falling), then these 4 seals will need to be replaced.

To remove each seal in turn you will need to:
  • Remove the Smart Drive motor and brass cylinder head
  • Drill a small hole (1-1.5mm) in the face of the oil seal that you can see
  • Make a steel hook on the end of 1mm hard wire
  • Use this wire to hook our each seal in turn
  • Clean out the pump and wash out any debris from drilling of the 4 holes.
  • Push in the new seal, you will need to make a pipe tool drift to do this
  • Reassemble and replace oil, etc. 
  • Run and check oil leak has been fixed