Parts & Accesories
- PowerSpout Hydro Turbines
- React Solar Water Pumps
- Coanda Intake Screens
- Off Grid Equipment
- Smart Drive & Hydro D.I.Y.
- Advice & Resources
- Find a Dealer
We advise every PowerSpout TRG owner to have one of these spare. A common need for replacement is the retaining cap being installed incorrectly (not greased and hand tight) causing damage to the thread when the cap comes off the sleeve under pressure.
The jet sleeve has a male 50mm (2" BSP) thread suitable for assembly with a valve or camlock fitting. This thread is not visible in the rendered illustration.
If you are making your own DIY turbine and want to convert to NPT thread (common in the USA) then you can using one of our BSP to NPT valves. You can buy these on their own or as a full jet/valve kit.
For a more comprehensive explanation of the threads supplied on our turbines click here
Note: This retaining cap and jet sleeve will only work with type 4 jets. If you have a PowerSpout turbine that uses type 3 jets you can purchase type 3 jets and caps or upgrade to type 4 using this product and our new type 4 jets. If you use older style jets with this product the parts will be damaged.
Refer to PowerSpout Document Index Links for a complete index of documents.